dmesg - Western Digital WD800JD-08MS

Return To Western Digital WD800JD-08MS System Information

CPU0 microcode updated early to revision 0x5d, date = 2010-10-02
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.17.4-301.fc21.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #1 SMP Thu Nov 27 19:09:10 UTC 2014
Command line: BOOT_IMAGE=/vmlinuz-3.17.4-301.fc21.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003f6affff] usable
BIOS-e820: [mem 0x000000003f6b0000-0x000000003f6cafff] ACPI data
BIOS-e820: [mem 0x000000003f6cb000-0x000000003f6cdfff] ACPI NVS
BIOS-e820: [mem 0x000000003f6ce000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: LENOVO 881094G/LENOVO, BIOS 2JKT36AUS 06/05/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3f6b0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-E3FFF uncachable
  E4000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 03F700000 mask FFFF00000 uncachable
  2 base 03F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f6300-0x000f630f] mapped at [ffff8800000f6300]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x0202c000, 0x0202cfff] PGTABLE
BRK [0x0202d000, 0x0202dfff] PGTABLE
BRK [0x0202e000, 0x0202efff] PGTABLE
init_memory_mapping: [mem 0x3f400000-0x3f5fffff]
 [mem 0x3f400000-0x3f5fffff] page 2M
init_memory_mapping: [mem 0x3c000000-0x3f3fffff]
 [mem 0x3c000000-0x3f3fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3bffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3bffffff] page 2M
init_memory_mapping: [mem 0x3f600000-0x3f6affff]
 [mem 0x3f600000-0x3f6affff] page 4k
BRK [0x0202f000, 0x0202ffff] PGTABLE
RAMDISK: [mem 0x35ae6000-0x36d6afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F61B0 000014 (v00 PTLTD )
ACPI: RSDT 0x000000003F6C2B92 000048 (v01 LENOVO TC-2J    00000036  LTP 00000000)
ACPI: FACP 0x000000003F6CAE2B 000074 (v01 LENOVO TC-2J    00000036 PTL  00000001)
ACPI: DSDT 0x000000003F6C42E4 006B47 (v01 LENOVO TC-2J    00000036 MSFT 0100000E)
ACPI: FACS 0x000000003F6CDFC0 000040
ACPI: TCPA 0x000000003F6CAE9F 000032 (v02 LENOVO TC-2J    00000036 PTL  00000000)
ACPI: ASF! 0x000000003F6CAED1 000063 (v16   CETP    2JETP 00000036 PTL  00000001)
ACPI: MCFG 0x000000003F6CAF34 00003C (v01 PTLTD    M2JG   00000036  LTP 00000000)
ACPI: APIC 0x000000003F6CAF70 000068 (v01 PTLTD  ? A2JC   00000036  LTP 00000000)
ACPI: BOOT 0x000000003F6CAFD8 000028 (v01 PTLTD  $SB2JBL$ 00000036  LTP 00000001)
ACPI: SSDT 0x000000003F6C4085 00025F (v01 PmRef  Cpu0Tst  00003000 INTL 20050228)
ACPI: SSDT 0x000000003F6C3FDF 0000A6 (v01 PmRef  Cpu1Tst  00003000 INTL 20050228)
ACPI: SSDT 0x000000003F6C2BDA 001405 (v01 PmRef  CpuPm    00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000003f6affff]
Initmem setup node 0 [mem 0x00000000-0x3f6affff]
  NODE_DATA [mem 0x3f69c000-0x3f6affff]
 [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003de00000-ffff88003edfffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0x3f6affff]
On node 0 totalpages: 259660
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 3995 pages used for memmap
  DMA32 zone: 255664 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
PM: Registered nosave memory: [mem 0x000d0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88003f400000 s88448 r8192 d22144 u1048576
pcpu-alloc: s88448 r8192 d22144 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 255580
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.17.4-301.fc21.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 986060K/1038640K available (7471K kernel code, 1219K rwdata, 3256K rodata, 1472K init, 1540K bss, 52580K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:65792 nr_irqs:440 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration failed
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 1860.645 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3721.29 BogoMIPS (lpj=1860645)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140724
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea2000 - ffffffff81ea9000)
ftrace: allocating 27208 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz (fam: 06, model: 0f, stepping: 02)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
CPU1 microcode updated early to revision 0x5d, date = 2010-10-02
CPU1: Thermal monitoring handled by SMI
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7442.58 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x3f6cb000-0x3f6cdfff] (12288 bytes)
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 12:44:20, date: 01/20/15
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20140724/nsarguments-189)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 1f 0 
acpi PNP0A03:00: _OSC failed (AE_TYPE); disabling ASPM
acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xfed40000-0xfed4ffff] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0d00-0xfdff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-09] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
pci 0000:00:02.0: [8086:2992] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd00fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x3400-0x3407]
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x3000-0x301f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x3020-0x303f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xd0404000-0xd04043ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0200000-0xd0203fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x3040-0x305f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x3080-0x309f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd0404400-0xd04047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at c800 (mask 00ff)
pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io  0x30d0-0x30df]
pci 0000:00:1f.2: reg 0x24: [io  0x30c0-0x30cf]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd0404800-0xd04048ff]
pci 0000:00:1f.3: reg 0x20: [io  0x30a0-0x30bf]
pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0x3430-0x3437]
pci 0000:00:1f.5: reg 0x14: [io  0x3424-0x3427]
pci 0000:00:1f.5: reg 0x18: [io  0x3428-0x342f]
pci 0000:00:1f.5: reg 0x1c: [io  0x3420-0x3423]
pci 0000:00:1f.5: reg 0x20: [io  0x30f0-0x30ff]
pci 0000:00:1f.5: reg 0x24: [io  0x30e0-0x30ef]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x0000-0x0fff]
pci 0000:03:00.0: [14e4:167b] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xd0100000-0xd010ffff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4:   bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f6b0000-0x3fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
pnp: PnP ACPI init
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0500-0x057f] has been reserved
system 00:00: [io  0x0800-0x080f] has been reserved
system 00:00: [io  0x1000-0x107f] could not be reserved
system 00:00: [io  0x1180-0x11bf] has been reserved
system 00:00: [io  0xc800-0xc87f] has been reserved
system 00:00: [io  0xc880-0xc8ff] has been reserved
system 00:00: [io  0xfe00] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: [dma 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
pnp: PnP ACPI: found 6 devices
Switched to clocksource acpi_pm
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x100000000-0x1001fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x100200000-0x1003fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.4: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0:   bridge window [mem 0x100000000-0x1001fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:1c.4:   bridge window [mem 0x100200000-0x1003fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x40000000-0x401fffff]
pci_bus 0000:02: resource 2 [mem 0x100000000-0x1001fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
pci_bus 0000:03: resource 2 [mem 0x100200000-0x1003fffff 64bit pref]
pci_bus 0000:0a: resource 4 [io  0x0000-0xffff]
pci_bus 0000:0a: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18964K (ffff880035ae6000 - ffff880036d6b000)
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x6f2, pf=0x1, revision=0x5d
microcode: CPU1 sig=0x6f2, pf=0x1, revision=0x5d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1421757860.522:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1962
Key type big_key registered
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965Q Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30d0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30d8 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x3430 ctl 0x3424 bmdma 0x30f0 irq 18
ata4: SATA max UDMA/133 cmd 0x3428 ctl 0x3420 bmdma 0x30f8 irq 18
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 16, io mem 0xd0404000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.17.4-301.fc21.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 16, io mem 0xd0404400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.17.4-301.fc21.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.17.4-301.fc21.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.17.4-301.fc21.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.17.4-301.fc21.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.17.4-301.fc21.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.17.4-301.fc21.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 4c7434e06ffa840aeaaa9e91f766c5fda0771260'
registered taskstats version 1
  Magic number: 15:427:734
rtc_cmos 00:01: setting system clock to 2015-01-20 12:44:21 UTC (1421757861)
PM: Hibernation image not present or could not be loaded.
usb 1-2: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-2: New USB device found, idVendor=0bda, idProduct=8171
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: RTL8188S WLAN Adapter 
usb 1-2: Manufacturer: Manufacturer Realtek 
usb 1-2: SerialNumber: 00e04c000001
usb 1-4: new high-speed USB device number 3 using ehci-pci
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: HL-DT-STDVD-ROM GDRH10N, 0M04, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-7: WDC WD800JD-08MSA1, 10.01E01, max UDMA/133
ata1.00: 156312576 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JD-08MS 1E01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDRH10N  0M04 PQ: 0 ANSI: 5
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-4: New USB device found, idVendor=0781, idProduct=5408
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: U3 Titanium
usb 1-4: Manufacturer: SanDisk Corporation
usb 1-4: SerialNumber: 000018394773FEA9
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
tsc: Refined TSC clocksource calibration: 1860.645 MHz
Freeing unused kernel memory: 1472K (ffffffff81d32000 - ffffffff81ea2000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 708K (ffff88000174f000 - ffff880001800000)
Freeing unused kernel memory: 840K (ffff880001b2e000 - ffff880001c00000)
random: systemd urandom read with 14 bits of entropy available
systemd-journald[104]: File /var/log/journal/7200a510313f468fa6baf6a6a0f2613e/system.journal corrupted or uncleanly shut down, renaming and replacing.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[drm] Initialized drm 1.1.0 20060810
usb-storage 1-4:1.0: USB Mass Storage device detected
PTP clock support registered
scsi host4: usb-storage 1-4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
tg3.c:v3.137 (May 11, 2014)
usb 6-1: new full-speed USB device number 2 using uhci_hcd
tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:16:41:36:20:24
tg3 0000:03:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:03:00.0 enp3s0: renamed from eth0
[drm] Memory usable by graphics device = 512M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 26 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20140724/video-1445)
ACPI: Video Device [IGD0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
usb 6-1: New USB device found, idVendor=09da, idProduct=9090
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Device
usb 6-1: Manufacturer: A4TECH
input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:09DA:9090.0001/input/input6
hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.1-1/input0
input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/0003:09DA:9090.0002/input/input7
hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.1-1/input1
usb 6-2: new low-speed USB device number 3 using uhci_hcd
Switched to clocksource tsc
usb 6-2: New USB device found, idVendor=04f3, idProduct=0103
usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/0003:04F3:0103.0003/input/input8
hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:1d.1-2/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/0003:04F3:0103.0004/input/input9
hid-generic 0003:04F3:0103.0004: input,hidraw3: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:1d.1-2/input1
random: nonblocking pool is initialized
scsi 4:0:0:0: Direct-Access     SanDisk  U3 Titanium      3.27 PQ: 0 ANSI: 2
scsi 4:0:0:1: CD-ROM            SanDisk  U3 Titanium      3.27 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 4001422 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sr 4:0:0:1: [sr1] scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
sr 4:0:0:1: Attached scsi CD-ROM sr1
sr 4:0:0:1: Attached scsi generic sg3 type 5
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: unknown partition table
sd 4:0:0:0: [sdb] Attached SCSI removable disk
PM: Starting manual resume from disk
PM: Hibernation image partition 253:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[104]: Received SIGTERM from PID 1 (systemd).
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit: type=1404 audit(1421757864.927:2): selinux=0 auid=4294967295 ses=4294967295
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[463]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
tpm_tis 00:05: 1.2 TPM (device-id 0x1002, rev-id 2)
tpm_tis 00:05: [Hardware Error]: Adjusting reported timeouts: A 1->1000us B 300->300000us C 1->1000us D 1->1000us
tpm_tis 00:05: Adjusting TPM timeout parameters.
tpm_tis 00:05: TPM is disabled/deactivated (0x6)
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000102f (\_SB_.PCI0.LPC0.PMIO) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011af (\_SB_.PCI0.LPC0.GPOX) (20140724/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
gpio_ich: GPIO from 206 to 255 on gpio_ich
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
snd_hda_intel 0000:00:1b.0: irq 27 for MSI/MSI-X
sound hdaudioC0D2: autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D2:    speaker_outs=1 (0x7/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    hp_outs=1 (0x6/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    mono: mono_out=0x0
sound hdaudioC0D2:    inputs:
sound hdaudioC0D2:      Mic=0x8
sound hdaudioC0D2:      Line=0x9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
kvm: disabled by bios
kvm: disabled by bios
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
Adding 2097148k swap on /dev/mapper/fedora-swap.  Priority:-1 extents:1 across:2097148k FS
r8712u: module is from the staging directory, the quality is unknown, you have been warned.
r8712u: Staging version
r8712u: register rtl8712_netdev_ops to netdev_ops
usb 1-2: r8712u: USB_SPEED_HIGH with 4 endpoints
usb 1-2: r8712u: Boot from EFUSE: Autoload OK
usb 1-2: r8712u: CustomerID = 0x0000
usb 1-2: r8712u: MAC Address from efuse = 00:13:33:b2:eb:8e
usb 1-2: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
r8712u 1-2:1.0 wlp0s26f7u2: renamed from wlan0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1305 audit(1421754277.594:3): audit_pid=590 old=0 auid=4294967295 ses=4294967295 res=1
nf_conntrack version 0.5.0 (7875 buckets, 31500 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
tg3 0000:03:00.0: irq 28 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8712u 1-2:1.0 wlp0s26f7u2: 1 RCR=0x153f00e
r8712u 1-2:1.0 wlp0s26f7u2: 2 RCR=0x553f00e
IPv6: ADDRCONF(NETDEV_UP): wlp0s26f7u2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s26f7u2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s26f7u2: link is not ready
usb 1-4: USB disconnect, device number 3
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s26f7u2: link becomes ready
usb 1-3: new high-speed USB device number 4 using ehci-pci
usb 1-3: New USB device found, idVendor=0781, idProduct=5408
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: U3 Titanium
usb 1-3: Manufacturer: SanDisk Corporation
usb 1-3: SerialNumber: 000018394773FEA9
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-3:1.0
scsi 5:0:0:0: Direct-Access     SanDisk  U3 Titanium      3.27 PQ: 0 ANSI: 2
scsi 5:0:0:1: CD-ROM            SanDisk  U3 Titanium      3.27 PQ: 0 ANSI: 2
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 4001422 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
sr 5:0:0:1: [sr1] scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
sr 5:0:0:1: Attached scsi CD-ROM sr1
sr 5:0:0:1: Attached scsi generic sg3 type 5
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
 sdb: unknown partition table
sd 5:0:0:0: [sdb] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 4
usb 1-3: new high-speed USB device number 5 using ehci-pci
usb 1-3: New USB device found, idVendor=0781, idProduct=5408
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: U3 Titanium
usb 1-3: Manufacturer: SanDisk Corporation
usb 1-3: SerialNumber: 000018394773FEA9
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-3:1.0
scsi 6:0:0:0: Direct-Access     SanDisk  U3 Titanium      3.27 PQ: 0 ANSI: 2
scsi 6:0:0:1: CD-ROM            SanDisk  U3 Titanium      3.27 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 4001422 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sr 6:0:0:1: [sr1] scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
sr 6:0:0:1: Attached scsi CD-ROM sr1
sr 6:0:0:1: Attached scsi generic sg3 type 5
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: unknown partition table
sd 6:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sdb): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdb): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (sdb): mounted filesystem without journal. Opts: (null)
usb 1-3: USB disconnect, device number 5
cdrom: issuing MRW background format suspend
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 128
Raw EDID:
 	00 ff ff ff ff ff ff 00 41 62 b2 01 26 ab 57 20
 	05 16 01 03 68 30 1b 78 ea ee d5 a5 55 48 9b 26
 	12 50 54 b3 0c 00 81 80 71 4f 81 00 95 00 d1 c0
 	01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
 	45 00 dd 0c 11 00 00 1e 00 00 00 fc 00 4d 61 65
 	73 74 72 6f 32 32 33 44 58 4c 00 00 00 fd 00 38
 	4c 1f 53 12 00 ff ff ff ff ff ff ff ff ff ff ff
 	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
perf interrupt took too long (2528 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5025 > 5000), lowering kernel.perf_event_max_sample_rate to 25000

Return To Western Digital WD800JD-08MS System Information